Why Won’t My 2020 Chevrolet Equinox Start? Possible Causes and Next Steps

A 2020 Chevrolet Equinox that will not start can have a number of possible causes, but the first and most useful distinction is what happens when you press the start button or turn the key. The symptoms can point a technician towards the affected system, although they do not confirm a failed component on their own.
First, identify the type of no-start
The engine does not crank
If the engine does not turn over at all, or you hear only a click, repeated clicks or silence, the issue may involve the 12-volt battery, battery connections, electrical supply, starting controls, starter circuit or the starter itself. A vehicle can still illuminate dashboard warning lights with insufficient available power for the starter, so illuminated instruments do not prove that the battery and connections are in good condition.
On a vehicle with an automatic transmission, also note whether the instrument display shows that the vehicle is in Park. A problem related to gear-position recognition or the starting authorisation system can prevent a start attempt, but this requires proper diagnosis rather than assumption.
The engine cranks but does not fire
If the engine turns over normally but does not start, the cause is in a different area from a no-crank condition. Broadly, an engine needs the correct air, fuel, spark and electronic control information to start. A fault affecting fuel delivery, ignition, engine-management sensors, air intake, timing or security/start authorisation may be relevant. Diagnostic trouble codes, live data and basic electrical checks are normally needed to distinguish between these possibilities; the sound of cranking alone is not enough to identify the failed part.
It starts intermittently or starts only after several attempts
An intermittent no-start is especially important to document. Note whether it happens only after the vehicle has been parked for a period, when the engine is hot or cold, in wet weather, or after an accessory has been used. Those details can help a workshop reproduce the fault. Avoid assuming that an intermittent problem has been cured simply because the Equinox starts on a later attempt.
Details worth recording before arranging diagnosis
- Whether the engine cranks, clicks or remains silent.
- Any warning messages, warning lamps or security-related messages displayed before or during the attempted start.
- Whether the remote key fob unlocks the vehicle normally and whether another key fob behaves differently, if one is available.
- Whether the battery has recently been replaced, discharged or jump-started.
- Whether the problem followed bodywork, electrical, battery or service work.
- Whether there was a fuel smell, smoke, overheating, unusual noise or a loss of power before the no-start occurred.
These observations are useful evidence for a technician, but none of them independently proves the cause. For example, a recently replaced battery does not rule out connection, charging, control-system or other faults.
Safe next steps
Check the vehicle’s owner’s manual for the correct starting, key-fob and roadside-assistance guidance for your specific Equinox. If a battery issue is suspected, have the battery, terminals and charging system assessed with appropriate equipment rather than relying only on dashboard lights or a single jump-start attempt.
Do not keep attempting to start the vehicle if you notice smoke, a strong fuel smell, damaged wiring, fluid leaks, overheating, or an unusual mechanical noise. In those circumstances, stop trying to start it and arrange professional assistance. If the vehicle is stranded in an unsafe location, prioritise personal safety and contact roadside assistance or emergency services as appropriate.
A qualified technician can first establish whether the fault is a no-crank or crank-no-start condition, inspect the relevant electrical and starting systems, and scan the vehicle for stored diagnostic information. That approach is more reliable than replacing parts based on online reports from other Equinox model years.
Do reports about other Equinox model years apply?
Not necessarily. Online discussions often group together Equinox vehicles from different years, engines and equipment levels. Those reports may describe a similar symptom, but they do not establish the cause of a no-start on a 2020 Chevrolet Equinox and should not be used as a model-specific repair diagnosis. For background on the terminology, see our general guide to no-crank, no-start symptoms.
Bottom line: A no-start can arise from a starting-power issue, a cranking-system issue, an engine-running-system issue or an electronic authorisation fault. Establishing whether the engine cranks, recording the associated warnings and having the vehicle diagnosed with the correct information for its configuration are the sensible next steps.